Related Experiment Video
Updated: Aug 15, 2025

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
A Wideband High-Isolation Microstrip MIMO Circularly-Polarized Antenna Based on Parasitic Elements
Ijaz Khan1, Kuang Zhang1, Qun Wu1
1School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin 150001, China.
Abstract:
This work presents a wideband, all-side square-cut square patch multiple-input, multiple-output circularly-polarized (MIMO-CP) high-isolation antenna. The MIMO-CP antenna contains a two-port square cut on all corners of the square patch, and parasitic elements of 9 × 5 periodic square metallic plates are designed and operated. The outer dimensions of the antenna are 40 × 70 mm2, and the FR4 substrate height is 1.6 mm. The proposed antenna with the parasitic elements improves impedance matching and enhances S-parameters and axial ratio (AR). In the suggested MIMO-CP antenna, a parasitic element is designed and placed around the antenna periodically to reduce mutual coupling (MC) and improve CP. Simulated results show that the suggested antenna has a wide bandwidth (BW) from 4.89 to 6.85 GHz for S11 and was < −10 dB with AR ≤ 3 dB from 5.42 to 6.58 GHz, with a peak gain of 6.6 dB. The suggested antennas have more than 30 dB isolation and a low profile, are affordable, easily made, and are CP. To make a comparison with the measured and simulated results, a MIMO-CP antenna structure was fabricated and tested. The suggested antenna is better in terms of efficiency, envelope correlation coefficient (ECC), diversity gain (DG), channel capacity loss (CCL), and total active reflection coefficient (TARC). The proposed antenna is adequate for WLAN applications.
More Related Videos
Related Concept Videos
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Parallel Resonance
Characteristics of Series Resonant Circuit
The Antenna Complex
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
Transmission Line Design Considerations

