Effect of Microwave Power and Gas Flow Rate on the Combustion Characteristics of the ADN-based Liquid Propellant

As a new type of energy-containing material, Ammonium dinitramide based liquid propellant has the advantages of being green, having low toxicity, good stability, and high safety performance. Traditional catalytic combustion methods require preheating of the catalytic bed and deactivation of the catalytic particles at high temperatures, while microwave ignition methods can effectively solve these problems. To study the combustion characteristics of ADN-based liquid propellants during microwave ignition, the influence of microwave power and gas flow rates on the combustion process are analyzed using experimental methods. A high-speed camera was used to observe the enhanced effects of microwave power and gas flow on plasma and flame. Combined with temperature measurement, the combustion process of ADN-based liquid propellants under the action of plasma was analyzed. The combustion process in the presence of microwaves was observed by comparing parameters such as flame length, flame temperature, and radical intensity. Those results show that, with the increase in microwave power, the luminous burning area of the flame grows significantly. The microwave power is increased by 250 W each, and the flame jet length is increased by nearly 20%. The increase in microwave power also leads to an increase in propellant combustion temperature, however, this increase gradually slows down. At a gas flow rate of 20 L/min, the ADN-based liquid propellant showed the best combustion performance with a maximum jet length of 14.51 cm and an average jet length increase of approximately 85.9% compared to 14 L/min. Too much gas flow rate will hinder the development of the jet, while the high-velocity airflow will have a cooling effect on the flame temperature. The results provide a basis for the specific parameter design of microwave ignition and promote the application of ADN-based liquid propellants in the aerospace field.