Related Experiment Video
Updated: Aug 15, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Experimental Investigation of the Performance of Corn Straw Fiber Cement-Stabilized Macadam
Liming Wang1, Pandeng Zhu1, Zikun Song1
1School of Civil Engineering, Northeastern Forestry University, Harbin 150040, China.
Abstract:
Recently, the application of plant fibers to improve the cementitious mix performance has attracted interest in the field of road materials owing to advantages of environmental protection and cost-effectiveness. As a planting crop, corn exhibits the advantages of being a more abundant resource with a wider distribution than those of other plant fibers. In this study, the effect of corn straw fiber on the properties of cement-stabilized macadam (5% cement) was investigated with the fiber length and content as variables. The test results revealed that the addition of a small amount of fiber marginally affects the compression density of cement-stabilized macadam. At a fiber length of 10 mm and a fiber content of 1%, the maximum increase in the compressive strength was 18.8%, and the maximum increase in the splitting strength was 35.4%. Moreover, at a fiber length of 15 mm and a fiber content of 1%, the shrinkage coefficient was reduced by 29%, and the crack resistance of cement-stabilized macadam was enhanced. In addition, the dry-wet cycle durability of cement-stabilized macadam was improved.
More Related Videos
06:27Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
07:15A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
Related Concept Videos
Fiber Reinforced Concrete
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Aggregate Cement Ratio
Accelerated Curing of Concrete
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...