Related Experiment Video
Updated: Aug 14, 2025

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Optimal siting of rainwater harvesting systems for reducing combined sewer overflows at city scale
Seyed Hamed Ghodsi1, Zhenduo Zhu1, L Shawn Matott2
1Department of Civil, Structural and Environmental Engineering, University at Buffalo, Buffalo, NY, USA.
Abstract:
The installation of green infrastructure (GI) is an effective approach to manage urban stormwater and combined sewer overflow (CSO) by restoring pre-development conditions in urban areas. Research on simulation-optimization techniques to aid with GI planning decision-making is expanding. However, due to high computational expense, the simulation-optimization methods are often based on design storm events, and it is unclear how much different rainfall scenarios (i.e., design storm events vs. long-term historical rainfall data) impact the optimal siting of GI. The Parallel Pareto Archived Dynamically Dimensioned Search (ParaPADDS) algorithm in a novel simulation-optimization tool OSTRICH-SWMM was used to leverage distributed computing resources. A case study was conducted to optimally site rainwater harvesting cisterns within 897 potential subcatchments throughout the City of Buffalo, New York. Seven design storm events with different return periods and rainfall durations and a one-month historical rainfall time series were considered. The results showed that the optimal solutions of siting cisterns using event-based scenarios, though less computationally expensive, may not perform well under continuous rainfall scenarios, suggesting design rainfall scenarios should be carefully considered for optimizing GI planning. The impact of rainfall scenarios was particularly significant in the middle region of the Pareto front of multi-objective optimization. Utilizing high-performance parallel computing, OSTRICH-SWMM is a promising tool to optimize GI at large spatial and temporal scales.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Design of an Irrigation Channel
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...
Design Example: Alignment of a Road Line Using GIS

