Multilayered Helical Spherical Triboelectric Nanogenerator with Charge Shuttling for Water Wave Energy Harvesting
Shijie Liu1,2, Xi Liang1,2, Pengfei Chen1,2
1CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 101400, P. R. China.
Abstract:
As an important part of natural resources, islands support the marine economy and build a blue barrier for marine ecological civilization. However, the power supply on these islands is difficult, limiting the development of marine internet of things (IoTs). In order to break the status quo, this work applies triboelectric nanogenerators (TENGs) to island power supply and ecological monitoring. A spherical TENG with two multilayered helical units is designed to harvest water wave energy, in which the space utilization rate reaches 92.5%. Then a charge shuttling mechanism is developed to improve the electrical output. The output current and power of a single TENG without power management reach 200.3 µA and 16.2 mW respectively, corresponding to a peak power density of 23.2 W m-3 . Moreover, a scheme of the power managed TENG is proposed for realizing large-scale wave energy harvesting. The TENG is demonstrated to successfully power a water quality detector, a Bluetooth thermo-hygrometer, and an intelligent wireless alarm system for remote environmental monitoring. This work not only proposes a new type of TENG for water wave energy harvesting with improved performance, but also provides a new strategy for intelligent ocean IoTs, which even contributes to the carbon neutralization.
Related Concept Videos
Van de Graaff Generator
Van de Graaff uses both smooth and pointed surfaces, conductors, and insulators to generate large static charges and, hence, large voltages. A substantial excess charge can be deposited on the sphere because it moves...
Faraday Disk Dynamo
Generation of Three-Phase Voltage
As the rotor...
Charging Conductors By Induction
Generally, conductors like metals do not allow any excess charge to be present on them. Any excess charge added to metals easily flows away, for example, when a metal is placed on the Earth. This process is called earthing.
However, conductors can be charged by a process called induction. For example, consider charging a...


