Inhibition of Hexavalent Chromium Release from Drinking Water Distribution Systems: Effects of Water Chemistry-Based...

In drinking water distribution systems, the oxidation of zerovalent chromium, Cr(0), in iron corrosion scales by chlorine residual disinfectant is the dominant reaction to form carcinogenic hexavalent chromium, Cr(VI). This study investigates inhibitive corrosion control strategies through adjustments of chemical water parameters (i.e., pH, silicate, phosphate, calcium, and alkalinity) on Cr(VI) formation through oxidation of Cr(0)_(s) by free chlorine under drinking water conditions. The results show that an increase in pH, silicate, alkalinity, and calcium suppressed Cr(VI) formation that was mainly attributed to in situ surface precipitation of new Cr(III) solids on the surface of Cr(0)_(s), including Cr(OH)_3(s), Cr₂(SiO₃)_3(s), CrPO_4(s), Cr₂(CO₃)_3(s), and Cr₁₀Ca(CO₃)_16(s). The Cr(III) surface precipitates were much less reactive with chlorine than Cr(0)_(s) and suppressed the Cr redox reactivity. The concentration of surface Cr(III) solids was inversely correlated with the rate constant of Cr(VI) formation. Adding phosphate either promoted or inhibited the Cr(VI) formation, depending on the phosphate concentration. This study provides fundamental insight into the Cr(VI) formation mechanisms via Cr(0) oxidation by chlorine and the importance of surface precipitation of Cr(III) solids with different corrosion control strategies and suggests that increasing the pH/alkalinity and addition of phosphate or silicate can be effective control strategies to minimize Cr(VI) formation.