A low-cost carbon-based electrochemical platform for determining 2,3-dihydroxyphenol: applications in natural water...

2,3-Dihydroxyphenol (DHP) is a phenolic compound that has been used as an additive in biodiesel to avoid the auto-oxidation of biofuels and also in the production of cosmetic products. However, this substance can be released into the environment during its manufacture, transport, disposal and industrial use and can be harmful to health due to its toxicity, and hence, monitoring its presence in different samples is very important. Therefore, this work describes an electroanalytical study of DHP using different carbon-based pastes prepared to evaluate which one would be more promising to be used as an electrochemical platform for DHP quantification. The materials studied (graphite, carbon black and carbon nanotubes) in this work were characterized by Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy and the Boehm method. Voltammetric studies showed that pure carbon black presented a higher current density for detecting DHP than the other materials tested (graphite, carbon black + graphite, carbon nanotubes, carbon nanotubes + graphite). In studying the medium's pH, the highest currents occurred in acid media and acetate buffer solutions. After optimizing the experimental parameters, it was possible to obtain a wide range of linear responses from 0.1 to 10 000 μmol L^-1 for DHP and a good limit of detection (LOD) of 0.03 μmol L^-1. The selectivity of the electrode was tested for different species that may be present in samples containing DHP. Finally, the electrode was applied to determine DHP in natural water and biodiesel samples, showing recovery values between 98 and 102%, indicating good accuracy.