Related Experiment Video
Updated: Aug 12, 2025

A Dual-Functional Electroactive Filter Towards Simultaneously SbIII Oxidation and Sequestration
Published on: December 5, 2019
Enhanced Direct Electron Transfer Mediated Contaminant Degradation by Fe(IV) Using a Carbon Black-Supported
Jiangzhou Xie1,2, Jieli Xie1, Christopher J Miller1
1UNSW Water Research Centre, School of Civil and Environmental Engineering, University of New South Wales, Sydney, NSW2052, Australia.
Abstract:
Iron complexes of tetra-amido macrocyclic ligands (Fe-TAML) are recognized to be effective catalysts for the degradation of a wide range of organic contaminants in homogeneous conditions with the high valent Fe(IV) and Fe(V) species generated on activation of the Fe-TAML complex by hydrogen peroxide (H2O2) recognized to be powerful oxidants. Electrochemical activation of Fe-TAML would appear an attractive alternative to H2O2 activation, especially if the Fe-TAML complex could be attached to the anode, as this would enable formation of high valent iron species at the anode and, importantly, retention of the valuable Fe-TAML complex within the reaction system. In this work, we affix Fe-TAML to the surface of carbon black particles and apply this "suspension anode" process to oxidize selected target compounds via generation of high valent iron species. We show that the overpotential for Fe(IV) formation is 0.17 V lower than the potential required to generate Fe(IV) electrochemically in homogeneous solution and also show that the stability of the Fe(IV) species is enhanced considerably compared to the homogeneous Fe-TAML case. Application of the carbon black-supported Fe-TAML suspension anode reactor to degradation of oxalate and hydroquinone with an initial pH value of 3 resulted in oxidation rate constants that were up to three times higher than could be achieved by anodic oxidation in the absence of Fe-TAML and at energy consumptions per order of removal substantially lower than could be achieved by alternate technologies.
More Related Videos
Related Concept Videos
Bioremediation
EDTA: Direct, Back-, and Displacement Titration
Direct titration involves buffering the metal ion solution to the desired pH and directly titrating with standard EDTA until the endpoint. The optimum pH ensures a large conditional formation constant of metal−EDTA and visibility of the free indicator color in the solution. In addition, auxiliary complexing reagents are used to prevent the precipitation of metal hydroxides...
Electrodeposition
Electrodeposition can...
EDTA: Auxiliary Complexing Reagents

