Related Experiment Video
Updated: Aug 11, 2025

A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure
Published on: February 20, 2019
Natural Silkworm Cocoon-Based Hierarchically Architected Composite Triboelectric Nanogenerators for Biomechanical
Qian Wang1, Bingang Xu1, Junxian Huang1
1Research Institute for Intelligent Wearable Systems, The Hong Kong Polytechnic University, Hong Kong 999077, Hong Kong.
Abstract:
Silk-based triboelectric nanogenerators (TENGs) have been demonstrated as an ideal platform for self-powered systems. The source of silk, Bombyx mori, entails a valuable ingredient, sericin (SS), viewed as a binder in composites. Interestingly, SS is rich in the amorphous region, possibly resulting in triboelectrification enhancement between the amorphous region and the crystallization region when subject to external pressure. However, most researchers remove the SS component when designing silk-TENGs to eliminate immunological responses as implantation in vivo through complicated degumming, rehydration, and dialysis procedures. Herein, integral SS retention was utilized to fabricate silk-TENGs without affecting the output performance. We designed, for the first time, an ultra-robust and natural silkworm cocoon layer (SCL)/polydimethylsiloxane (PDMS)-TENG as an energy harvester to scavenge waste energy from human motions. The working mechanisms and influence of operational parameters are explored and studied. Working in the contact-separation mode, the electrical outputs of the SCL/PDMS-TENG in terms of open-circuit voltage, short-circuit current, and power density reaches 126 V, 3 μA, and 216 mW/m2, respectively. The integrated self-charging TENG is demonstrated to power small electronic electronics and monitor human motions. This work widens a new dielectric material selection with SS retention to boost the output performance of TENGs for practical applications.
More Related Videos
10:39Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal
Published on: January 15, 2016
09:23Reactive Inkjet Printing and Propulsion Analysis of Silk-based Self-propelled Micro-stirrers
Published on: April 26, 2019