Comparative Assessment of Methane Emissions from Onshore LNG Facilities Measured Using Differential Absorption Lidar

This study provides results from measurements of methane emissions from three onshore LNG liquefaction facilities and two regasification facilities across different regions using the Differential Absorption Lidar (DIAL) technique. The measurement approach was to quantify, at each facility, emissions from the key functional elements (FEs), defined as spatially separable areas related to different identified processes. The DIAL technique enabled quantification of emissions at the FE level, allowing emission factors (EFs) to be determined for each FE using activity data. The comprehensive data set presented here should not be used for annualization, however shows the potential of what could be achieved with a larger sample size in terms of potential methane reduction and improving inventory accuracy. Among the benefits in obtaining data with this level of granularity is the possibility to compare the emissions of similar FEs on different plants including FEs present in both liquefaction and regasification facilities. Emissions from noncontinuous sources and superemitters can also be identified and quantified enabling more accurate inventory reporting and targeted maintenance and repair. Site throughput during the measurement periods was used to characterize total site EF; on average the methane losses were 0.018% and 0.070% of throughput at the regasification and liquefaction facilities, respectively.