Related Experiment Video
Updated: Aug 10, 2025

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
How Do Quantum Effects Influence the Capacitance and Carrier Density of Monolayer MoS2 Transistors?
Robert K A Bennett1, Eric Pop1
1Department of Electrical Engineering, Stanford University, Stanford, California 94305, United States.
Abstract:
When transistor gate insulators have nanometer-scale equivalent oxide thickness (EOT), the gate capacitance (CG) becomes smaller than the oxide capacitance (Cox) due to the quantum capacitance and charge centroid capacitance of the channel. Here, we study the capacitance of monolayer MoS2 as a prototypical two-dimensional (2D) channel while considering spatial variations in the potential, charge density, and density of states. At 0.5 nm EOT, the monolayer MoS2 capacitance is smaller than its quantum capacitance, limiting the single-gated CG of an n-type channel to between 63% and 78% of Cox, for gate overdrive voltages between 0.5 and 1 V. Despite these limitations, for dual-gated devices, the on-state CG of monolayer MoS2 is 50% greater than that of silicon at 0.5 nm EOT and more than three times that of InGaAs at 1 nm EOT, indicating that such 2D semiconductors are promising for improved gate control of nanoscale transistors at future technology nodes.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

