Carbon Nanotube-Incorporated Nanofibers for Immunosensor Preparation against CD36

The increased serum concentration of CD36 is significantly associated with atherosclerosis, insulin resistance, and diabetes mellitus. Currently, there is no sensor system used for the detection of CD36 in the clinical field. Therefore, there is a need to develop a sensor system for the detection of CD36. The large surface area/volume ratio and controllable surface conformation of electrospun nanofibers (ENs) make them highly attractive for immunosensor applications. In the present study, PS/MWCNT-PAMAM ENs were produced and used as an immobilization matrix of Anti-CD36. Thus, the electrochemical behavior of the developed nanocomposite-based ENs and their usage potential were investigated for immunosensor applications. First, an oxidized multiwall carbon nanotube (MWCNT-OH) was synthesized and modified with a polyamidoamine generation 3 (PAMAM G3) dendrimer. The synthesized MWCNT-PAMAM nanocomposite was mixed with polystyrene (PS) solutions at different ratios to produce bead-free, smooth, and uniform PS/MWCNT-PAMAM ENs. PS/MWCNT-PAMAM ENs were accumulated on a screen-printed carbon electrode (SPCE) using the electrospinning technique. A biofunctional surface on the PS/MWCNT-PAMAM EN-coated SPCE was created using carbodiimide chemistry by covalent immobilization of Anti-CD36. The analytic performance characteristics of the developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor were determined by performing electrochemical measurements in the presence of the CD36 protein. The linear detection range was found to be from 5 to 40 ng/mL, and the limit of detection was calculated as 3.94 ng/mL for CD36. The developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor also displayed high tolerance to interference substances, good repeatability, and high recovery percent (recovery%) for artificial blood serum analysis.