Design, fabrication, and evaluation of a large-area hybrid solar simulator for remote sensing applications

Solar irradiance variations have a direct effect on the accuracy and repeatability of identifying spectral signatures in the remote sensing field experiments. Solar simulators have been deployed to allow for testing under controlled and reproducible laboratory conditions. However, it is difficult and expensive to make a large-area solar simulation with the appropriate spectral content and spatial uniformity of irradiance. In this study, a hybrid solar simulator has been designed and constructed to provide large-area illumination for remote sensing simulation applications. A design method based on the two-phase genetic algorithm is proposed to improve the performance of the spectral match and spatial uniformity, which no longer relies on the traditional trial-and-error technique. The first phase is used to determine the most appropriate configuration of different lamps in order to represent the solar spectrum. The second phase is to accommodate an optimal placement of the multiple sources to achieve irradiance uniformity. Both numerical simulations and experiments were performed to verify the performances. The results showed that the solar simulator provided a good spectral match and spatial irradiance for simulating the variations in direct normal irradiance at different solar zenith angles. In addition, the modular design makes it possible to adjust irradiance on the target area without altering the spectral distribution. This work demonstrates the development and measurement of a hybrid solar simulator with a realizable optimal configuration of multiple lamps, and offers the prospect of a scalable, large-area solar simulation.