The Effect of Periodic Duty Cyclings in Metal-Modulated Epitaxy on GaN:Mg Film

Metal modulation epitaxy (MME) is a technique in which metal beams (Al, Ga, In, and Mg) are switched on and off in short periods in an RF MBE system while a continuous nitrogen plasma beam is kept on. We systematically studied the effect of periodic duty cycling on the morphology, crystalline quality, Mg doping concentration, and electrical properties of GaN:Mg films grown by MME. When the metal shutter duty cycling is 20 s open/10 s close, the sample has smooth surface with clear steps even with Mg doping concentration higher than 1 × 10²⁰ cm^-3. The RMS roughness is about 0.5 nm. The FWHM of (002) XRD rocking curve is 230 arcsec and the FWHM of (102) XRD rocking curve is 260 arcsec. As result, a hole concentration of 5 × 10¹⁸ cm^-3 and a resistivity of 1.5 Ω·cm have been obtained. The hole concentration increases due to the incorporation of surface accumulated Mg dopants into suitable Ga substitutional sites with minimal formation of compensatory defects.