Flare exhaust: An underestimated pollution source in municipal solid waste landfills

Flares are commonly used in municipal solid waste landfills, and the pollution from flare exhaust is usually underestimated. This study aimed to reveal the odorants, hazardous pollutants, and greenhouse gas emission characteristics of the flare exhaust. Odorants, hazardous pollutants, and greenhouse gases emitted from air-assisted flares and a diffusion flare were analyzed, the priority monitoring pollutants were identified, and the combustion and odorant removal efficiencies of the flares were estimated. The concentrations of most odorants and the sum of odor activity values decreased significantly after combustion, but the odor concentration could still exceed 2,000. The odorants in the flare exhaust were dominated by oxygenated volatile organic compounds (OVOCs), while the major odor contributors were OVOCs and sulfur compounds. Hazardous pollutants, including carcinogens, acute toxic pollutants, endocrine disrupting chemicals, and ozone precursors with the total ozone formation potential up to 75 ppm_v, as well as greenhouse gases (methane and nitrous oxide with maximum concentrations of 4,000 and 1.9 ppm_v, respectively) were emitted from the flares. Additionally, secondary pollutants, such as acetaldehyde and benzene, were formed during combustion. The combustion performance of the flares varied with landfill gas composition and flare design. The combustion and pollutant removal efficiencies could be lower than 90%, especially for the diffusion flare. Acetaldehyde, benzene, toluene, p-cymene, limonene, hydrogen sulfide, and methane could be priority monitoring pollutants for flare emissions in landfills. Flares are useful for odor and greenhouse gas control in landfills, but they are also potential sources of odor, hazardous pollutants, and greenhouse gases.