Response Surface Methodology Approach for Predicting Convective/Infrared Drying, Quality, Bioactive and Vitamin C
Fatemeh Joudi-Sarighayeh1, Yousef Abbaspour-Gilandeh1, Mohammad Kaveh2
1Department of Biosystems Engineering, College of Agriculture and Natural Resources, University of Mohaghegh Ardabili, Ardabil 56199-11367, Iran.
Abstract:
In this research, a convective/infrared (CV/IR) dryer was used to dry pumpkin slices. For optimization of the drying conditions, the influence of three levels of independent variables including air temperature (40, 55, and 70 °C), air velocity (0.5, 1, and 1.5 m/s), and IR power (250, 500, and 750 W) were assessed by response surface method (RSM) through a face-centered central composite design. Analysis of variance (non-fitting factor and R2 value) was employed to determine the desirability of the model. Response surfaces and diagrams were also utilized to show the interactive influence of the independent variables with the response variables (drying time, energy consumption, shrinkage, total color variation, rehydration ratio, total phenol, antioxidant, and vitamin C contents). According to the results, optimal drying conditions involved a temperature of 70 °C, air velocity of 0.69 m/s, and IR power of 750 W. At the mentioned conditions, response variables of drying time, energy consumption, shrinkage, color, rehydration ratio, total phenol, antioxidant, and vitamin C contents were 72.53 min, 24.52 MJ/kg, 23%, 14.74, 4.97, 617.97 mg GA/100 g dw, 81.57%, and 4.02 mg/g dw, with a confidence level of 0.948, respectively.
