Investigation on the Photodegradation Stability of Acrylic Acid-Grafted Poly(butylene...

The application efficiency of biodegradable polymers used in a natural environment requires improved resistance to ultraviolet (UV) photodegradation. In this report, 1,6-hexanediamine modified layered zinc phenylphosphonate (m-PPZn), utilized as a UV protection additive for acrylic acid-grafted poly(butylene carbonate-co-terephthalate) (g-PBCT), was successfully fabricated and compared to the solution mixing process. Experimental data of both wide-angle X-ray diffraction and transmission electron microscopy reveal that the g-PBCT polymer matrix was intercalated into the interlayer spacing of m-PPZn, which was approximately delaminated in the composite materials. The evolution of photodegradation behavior for g-PBCT/m-PPZn composites was identified using Fourier transform infrared spectroscopy and gel permeation chromatography after being artificially irradiated by a light source. The change of carboxyl group produced via photodegradation was used to show the enhanced UV protection ability of m-PPZn in the composite materials. All results indicate that the carbonyl index of the g-PBCT/m-PPZn composite materials after photodegradation for 4 weeks was extensively lower than that of the pure g-PBCT polymer matrix. These findings were also supported by the decrease in the molecular weight of g-PBCT after photodegradation for 4 weeks, from 20.76% to 8.21%, with the loading of 5 wt% m-PPZn content. Both observations were probably owing to the better UV reflection ability of m-PPZn. This investigation shows, through typical methodology, a significant advantage of fabricating the photodegradation stabilizer to enhance the UV photodegradation behavior of the biodegradable polymer using an m-PPZn compared to other UV stabilizer particles or additives.