Utilization of Carrier-Frequency Offset Measurements in UWB TDoA Positioning with Receiving Tag

High-capacity impulse-radio ultra-wideband (IR-UWB) indoor localization systems are typically based on the time difference of arrival (TDoA) principle. When the fixed and synchronized localization infrastructure, the anchors, transmit precisely timestamped messages, a virtually unlimited number of user receivers (tags) are able to estimate their position based on differences in the time of arrival of those messages. However, the drift of the tag clock causes systematic errors at a sufficiently high magnitude to effectively deny the positioning, if left uncorrected. Previously, the extended Kalman filter (EKF) has been used to track and compensate for the clock drift. In this article, the utilization of a carrier frequency offset (CFO) measurement for suppressing the clock-drift related error in anchor-to-tag positioning is presented and compared to the filtered solution. The CFO is readily available in the coherent UWB transceivers, such as Decawave DW1000. It is inherently related to the clock drift, since both carrier and timestamping frequencies are derived from the identical reference oscillator. The experimental evaluation shows that the CFO-aided solution performs worse than the EKF-based solution in terms of accuracy. Nonetheless, with CFO-aiding it is possible to obtain a solution based on measurements from a single epoch, which is favorable especially for power-constrained applications.