The Historic Materials and Structures Due to the Aspect of Their Actual Challenges
Dariusz Bajno1, Agnieszka Grzybowska1, Ireneusz Trzyński2
1Department of Building Structures, Faculty of Civil and Environmental Engineering and Architecture, Bydgoszcz University of Science and Technology, 85-796 Bydgoszcz, Poland.
Abstract:
The subject of the article is to assess the suitability of over materials over a hundred years old that are embedded in historic building structures in conditions of contemporary utility challenges in residential and public buildings. It is based on an example of technical condition evaluation of a ceramic staircase erected in 1840 and a structure of two reinforced concrete staircases from the year 1910. As a part of in-situ and laboratory tests, the physical and mechanical parameters of unique historical materials (brick, concrete) were determined. Then the conditions for their incorporation were inventoried and determined in order to save the unique material and technical solutions used in the first half of the 19th century and the first decade of the 20th century. The article is a summary of the research and analyzes carried out in terms of proper handling of historical materials, buildings and their elements that could still fulfill their original function and be a witness to the history of a certain era. Both a research case and an application case are described here. It will allow for the continuation of these studies directly in the facility, thus assessing the effectiveness and suitability of such methods for use in similar or other situations. The aim of this approach was to introduce a non-invasive reinforcing technique that would not change the valuable and authentic appearance of these historic structures. It would also not change their static schemes, and at the same time would ensure their proper load-bearing capacity, bearing in mind that the materials used here are not equivalent to current regulations and standards.
More Related Videos
10:00Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
10:24Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
Published on: November 1, 2018
Related Concept Videos
Mortar Joint Deterioration in Masonry
The...
Reinforced Brick Masonry
To fortify brick walls...
Spanning Openings in Brick Walls
Lintels are primary supports used to span openings and can be crafted from materials such as reinforced concrete, steel-reinforced brick masonry, or simple steel angles. These are straightforward to install and are typically concealed...
Masonry
The process of building with masonry is hands-on and can be executed with basic tools....
Brick Masonry
For thicker walls, multiple wythes are bonded together using...
Masonry in Cold and Hot Weather Conditions
Other key practices include keeping masonry units...
