Outstanding Fill Factor in Inverted Organic Solar Cells with SnO₂ by Atomic Layer Deposition

Transport layers are of outmost importance for thin-film solar cells, determining not only their efficiency but also their stability. To bring one of these thin-film technologies toward mass production, many factors besides efficiency and stability become important, including the ease of deposition in a scalable manner and the cost of the different material's layers. Herein, highly efficient organic solar cells (OSCs), in the inverted structure (n-i-p), are demonstrated by using as electron transport layer (ETL) tin oxide (SnO₂) deposited by atomic layer deposition (ALD). ALD is an industrial grade technique which can be applied at the wafer level and also in a roll-to-roll configuration. A champion power conversion efficiency (PCE) of 17.26% and a record fill factor (FF) of 79% are shown by PM6:L8-BO OSCs when using ALD-SnO₂ as ETL. These devices outperform solar cells with SnO₂ nanoparticles casted from solution (PCE 16.03%, FF 74%) and also those utilizing the more common sol-gel ZnO (PCE 16.84%, FF 77%). The outstanding results are attributed to a reduced charge carrier recombination at the interface between the ALD-SnO₂ film and the active layer. Furthermore, a higher stability under illumination is demonstrated for the devices with ALD-SnO₂ in comparison with those utilizing ZnO.