γ-Resistant Microporous CAU-1 MOF for Selective Remediation of Thorium

A simple solvothermal method was used to synthesize a metal-organic framework (MOF) with an Al metal entity, viz., CAU-1 NH₂. The synthesized MOF was characterized using different techniques like X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy (SEM), field emission SEM (FE-SEM), transmission electron microscopy, small-angle X-ray scattering, positron annihilation lifetime spectroscopy, and X-ray photoelectron spectroscopy. The radiation stability was evaluated by irradiating the material up to a cumulative dose of 2 MGy using ⁶⁰Co for the first time. The studies showed a remarkable gamma irradiation stability of the material up to 1 MGy. The porosity and surface area of the synthesized MOF were determined by Brunauer-Emmett-Teller, which showed a high specific surface area of 550 m²/g. The pH dependence study of Th uptake from an aqueous solution was performed from pH 2-8, followed by adsorption isotherm and adsorption kinetics studies. These results revealed that the Langmuir and pseudo-second-order kinetic models can be well adapted for understanding the Th uptake and kinetics, respectively. The synthesized MOF exhibited an ∼404 mg/g thorium adsorption capacity. Selectivity studies of adsorption of Th w.r.t. to U and different metal ions such as Cu, Co, Ni, and Fe showed that Th gets adsorbed preferentially as compared to other metal ions. In addition, the MOF could be used multiple times without much deterioration.