Related Experiment Video
Updated: Aug 2, 2025

Real-time Breath Analysis by Using Secondary Nanoelectrospray Ionization Coupled to High Resolution Mass Spectrometry
Published on: March 9, 2018
Contactless Interface Using Exhaled Breath and Thermal Imaging
1Department of IT Engineering, Sookmyung Women's University, Seoul 04310, Republic of Korea.
Abstract:
A new type of interface using a conduction hot spot reflecting the user's intention is presented. Conventional methods using fingertips to generate conduction hot points cannot be applied to those who have difficulty using their hands or cold hands. In order to overcome this problem, an exhaling interaction using a hollow rod is proposed and extensively analyzed in this paper. A preliminary study on exhaling interaction demonstrated the possibility of the method. This paper is an attempt to develop and extend the concept and provide the necessary information for properly implementing the interaction method. We have repeatedly performed conduction hot-point-generation experiments on various materials that can replace walls or screens to make wide use of the proposed interfaces. Furthermore, a lot of experiments have been conducted in different seasons, considering that the surface temperature of objects also changes depending on the season. Based on the results of an extensive amount of experiments, we provide key observations on important factors such as material, season, and user condition, which should be considered for realizing contactless exhaling interfaces.
Related Concept Videos
Assessing Body Temperature - Oral
Step 1:
Start by practicing proper hand hygiene to prevent the spread of microorganisms.
Step 2:
Take the thermometer out of the charging unit, switch it on, and wait for the ready sign.
Step 3:
Gently slide the probe cover until a click is heard. This simple action prevents cross-contamination and ensures the correct placement of the probe cover.
Step 4:
Instruct the patient to open their mouth and place...
Assessing Body Temperature - Temporal Artery
Step 1: Perform hand hygiene and don a fresh pair of gloves to prevent cross-infection and ensure patient safety.
Step 2: Explain the procedure to the patient to establish trust. Clear communication establishes trust with the patient, ensures they understand what to expect, promotes cooperation, and enhances comfort during the procedure.
Step 3: Assess the patient's...
Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...
Equipments Used to Measure Body Temperature
Glass-bulb Thermometer:
Glass-bulb thermometers are hollow glass tubes with a bulb tip containing liquid such as ethanol or mercury. Historically, glass bulb mercury thermometers were the standard device to measure body temperature. Today, mercury thermometers are prohibited in many countries due to the hazardous effects of mercury and the risk of exposure if the glass bulb breaks. In general,...
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...

