Related Experiment Video
Updated: Aug 2, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Neural Adaptive Intermittent Output Feedback Control for Autonomous Underwater Vehicles With Full-State Quantitative
Abstract:
In this article, a neural adaptive intermittent output feedback control is investigated for autonomous underwater vehicles (AUVs) with full-state quantitative designs (FSQDs). To achieve the prespecified tracking performance determined by quantitative indices (e.g., overshoot, convergence time, steady-state accuracy, and maximum deviation) at both kinematic and kinetic levels, FSQDs are designed by transforming constrained AUV model into an unconstrained model via one-sided hyperbolic cosecant boundaries and nonlinear mapping functions. An intermittent sampling-based neural estimator (ISNE) is devised to reconstruct the matched and mismatched lumped disturbances as well as immeasurable velocity states of transformed AUV model, where only system outputs after intermittent sampling are required. Using the estimations of ISNE and the system outputs after triggering, an intermittent output feedback control law incorporated with hybrid threshold event-triggered mechanism (HTETM) is designed to achieve ultimately uniformly bounded (UUB) results. Simulation results are provided and analyzed to validate the effectiveness of the studied control strategy with application to an omnidirectional intelligent navigator (ODIN).
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Feedback Loops

