Narrowing the analytical gap for water-soluble polymers: A novel trace-analytical method and first quantitative...

Water-soluble polymers (WSPs) like polyethylene oxide (PEO) have annual production volumes ranging from thousands to millions of tonnes and are used in a wide variety of applications that enable a release into the aquatic environment. Despite these facts, a lack of quantitative trace-analytical methods for WSPs prevents the comprehensive study of their environmental occurrence. Here, size exclusion chromatography was hyphenated with electrospray ionization high-resolution mass spectrometry. An all-ion fragmentation approach for the formation of diagnostic fragments independent of molecular weight, charge state, and ion species was used to quantify PEO and its derivatives in wastewater treatment plants (WWTPs) and surface water samples. Despite its inherent biodegradability, PEO concentrations found in the samples analysed ranged from 1 μg/L) and reached up to 20 μg/L (effluent) and 400 μg/L (influent) for WWTPs. A substantial shift in molecular weight ranges was observed between influent and effluent, pointing towards a molecular weight fraction between 1.3 and 4 kDa being dominant in the effluent. Due to an assumed size exclusion during sample enrichment, information on the MW-distribution of PEO is limited to MW < 55 kDa. The high concentrations widely detected for a readily biodegradable WSP such as PEO, raise strong concerns about the occurrence and fate of recalcitrant WSPs in the aquatic environment. The method presented herein may provide the tools necessary to assess the burden of these high production volume chemicals and the risk they may pose.