Related Experiment Video
Updated: Aug 1, 2025

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
Harvesting Aurantiochytrium sp. SW1 via Flocculation Using Chitosan: Effects of Flocculation Parameters on
Nadzirul Zamri1, Nurul Nabila Suleiman1, Norsyaqira Mohd Johar1
1Department of Biological Sciences & Biotechnology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia.
Abstract:
The use of chitosan as a flocculant has become a topic of interest over the years due to its positively charged polymer and biodegradable and non-toxic properties. However, most studies only focus on microalgae and wastewater treatment. This study provides crucial insight into the potential of using chitosan as an organic flocculant to harvest lipids and docosahexaenoic acid (DHA-rich Aurantiochytrium sp. SW1 cells by examining the correlation of flocculation parameters (chitosan concentration, molecular weight, medium pH, culture age, and cell density) toward the flocculation efficiency and zeta potential of the cells. A strong correlation between the pH and harvesting efficiency was observed as the pH increased from 3, with the optimal flocculation efficiency of >95% achieved at a chitosan concentration of 0.5 g/L at pH 6 where the zeta potential was almost zero (3.26 mV). The culture age and chitosan molecular weight have no effect on the flocculation efficiency but increasing the cell density decreases the flocculation efficiency. This is the first study to reveal the potential of chitosan to be used as a harvesting alternative for thraustochytrid cells.
More Related Videos
Related Concept Videos
Colloidal precipitates
Factors Affecting Solubility
Coagulation
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Extraction: Advanced Methods

