Modifying Water-Frost Resistance and Mechanical Properties of Lime Mortar Using Siliceous and Fluidised Bed Fly...

The research focuses on pozzolanic additives, which are compatible with traditional lime mortars, and enable the modification of the rheological, physical and mechanical properties of tested composites. It was noted that lime mortars with fluidised bed fly ash require sand without impurities to avoid possible ettringite crystallisation. The work presents siliceous fly ash and fluidised bed combustion fly ash to modify the frost resistance and mechanical properties of traditional lime mortars with and without the addition of cement. The results show better effects using fluidised bed ash. Traditional Portland cement CEM I 42.5R was used to activate ash and increase the results. The possibility of a significant improvement of properties is indicated with a hybrid addition to the lime binder of 15-30% ash (siliceous or fluidised bed ash) and 15-30% cement. Changing the class and type of cement provides an additional opportunity to alter the properties of the composites. For architectural reasons relating to colour, the suitability of lighter fluidised bed ash instead of darker siliceous ash and of white Portland cement instead of the traditional grey cement can be used. The proposed mortars can be the basis for future modifications with admixtures and additives, e.g., metakaolin, polymers, fibres, slag, glass powder and impregnating agents.