Gelatin acrylamide with improved UV crosslinking and mechanical properties for 3D biofabrication

Photocrosslinkable gelatin has attracted increasing interest in the field of biofabrication, with the most studied and widely used photocrosslinkable gelatin being gelatin methacrylate (GelMa). However, the 3D fabrication of GelMa has presented several limitations and challenges, primarily due to its slow crosslinking speed. It is generally known that acryl-based functional groups have faster reaction kinetics than methacryl-base groups. However, gelatin acrylamide (GelAc) has not been widely investigated, largely due to its increased complexity of synthesis relative to GelMA. In this study, we developed a novel synthesis method for GelAc. By varying the reaction ratio of reagents, GelAc with a degree of substitution from 20% to 95% was produced. The UV crosslinking properties of GelAc was studied, demonstrating significantly faster crosslinking kinetics than GelMa, especially at lower concentrations and low photoinitiator concentrations. The swelling ratio and mechanical properties of the crosslinked GelAc hydrogel were also characterized, and biocompatibility experiments conducted via both surface seeding and hydrogel encapsulation of cells, with good cell viability observed. The application of GelAc for 3D biofabrication was demonstrated by 3D printing. GelAc can be a useful material for the fabrication of 3D conduits for tissue engineering applications.