Tantalum oxide and silicon oxide mixture coatings deposited using microwave plasma assisted co-sputtering for optical mirror coatings in gravitational wave detectors
Related Experiment Video
Updated: Jul 31, 2025

Niobium Oxide Films Deposited by Reactive Sputtering: Effect of Oxygen Flow Rate
Published on: September 28, 2019
Abstract:
This work presents the characterization of the optical and mechanical properties of thin films based on (T a 2 O 5)1- (S i O 2)x mixed oxides deposited by microwave plasma assisted co-sputtering, including post-annealing treatments. The deposition of low mechanical loss materials (3×10-5) with a high refractive index (1.93) while maintaining low processing costs was achieved and the following trends were demonstrated: The energy band gap increased as the S i O 2 concentration was increased in the mixture, and the disorder constant decreased when the annealing temperatures increased. Annealing of the mixtures also showed positive effects to reduce the mechanical losses and the optical absorption. This demonstrates their potential as an alternative high-index material for optical coatings in gravitational wave detectors using a low-cost process.
More Related Videos
06:27Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques
Published on: July 2, 2018
12:08Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
Published on: July 18, 2015