Related Experiment Video
Updated: Jul 31, 2025

Influence of Hybrid Perovskite Fabrication Methods on Film Formation, Electronic Structure, and Solar Cell Performance
Published on: February 27, 2017
Quantifying Charge Extraction and Recombination Using the Rise and Decay of the Transient Photovoltage of Perovskite
Lisa Krückemeier1,2, Zhifa Liu1, Thomas Kirchartz1,3
1IEK5-Photovoltaik, Forschungszentrum Jülich, 52425, Jülich, Germany.
Abstract:
The extraction of photogenerated charge carriers and the generation of a photovoltage belong to the fundamental functionalities of any solar cell. These processes happen not instantaneously but rather come with finite time constants, e.g., a time constant related to the rise of the externally measured open circuit voltage following a short light pulse. Herein, a new method to analyze transient photovoltage measurements at different bias light intensities combining rise and decay times of the photovoltage. The approach uses a linearized version of a system of two coupled differential equations that are solved analytically by determining the eigenvalues of a 2 × 2 matrix. By comparison between the eigenvalues and the measured rise and decay times during a transient photovoltage measurement, the rates of carrier recombination and extraction as a function of bias voltage are determined, and establish a simple link between their ratio and the efficiency losses in the perovskite solar cell.
Related Concept Videos
P-N junction
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
Voltaic/Galvanic Cells
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Thermal and Photochemical Electrocyclic Reactions: Overview
Continuous Charge Distributions
The electric charge can also be subjected to an analogical...

