Evaluation of a biobased polycarbonate interpenetrated network in a dental resin composite

Silanization of filler particles in a dental resin composite is achieved by the formation of Si-O-Si bonds, however, these bonds are especially vulnerable to hydrolysis because this covalent bond has a significant ionic character due to the electronegativity differences between the atoms. The objective of this study was to evaluate the use of an interpenetrated network (IPN) as alternative of silanization reaction and to assess its effect in selected properties of experimental photopolymerizable resin composites. The interpenetrate network was obtained during the photopolymerization reaction of organic matrix (BisGMA/TEGDMA) with a biobased polycarbonate. Its characterization was performed via FTIR, flexural strength, flexural modulus, depth of cure, sorption water and solubility. A resin composite formulated with non-silanized filler particles was used as control. The IPN with a biobased polycarbonate was successfully synthesized. The results showed that the IPN based resin composite had higher values of flexural strength, flexural modulus, and degree of double bond conversion than the control (p < 0.05). Polymerization shrinkage, water sorption and solubility were statistically significantly lower than the control resin (p < 0.05). Finally, this study shows there were no statistically significant differences for the biocompatibility outcomes (p > 0.05). The biobased IPN replaces the silanization reaction in resin composites, improving physical and chemical properties. Therefore, IPN with a biobased polycarbonate could be potentially useful in the formulation of dental resin composites.