Related Experiment Video
Updated: Jul 30, 2025
A Facile Synthetic Method to Obtain Bismuth Oxyiodide Microspheres Highly Functional for the Photocatalytic Processes of Water Depuration
Published on: March 29, 2019
Forever no more: Complete mineralization of per- and polyfluoroalkyl substances (PFAS) using an optimized
Natalia O'Connor1, David Patch1, Diana Noble1
1Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, ON K7K 7B4, Canada.
Abstract:
As the global issue of PFAS contamination in water continues to grow there exists a need for technologies capable of fully mineralizing PFAS in water, with destruction being measured as both a loss of the initial PFAS and a quantitative recovery of the resultant fluoride ions. This study investigates the use of sulfite and iodide in a bicarbonate-buffered alkaline system activated with ultraviolet (UV) light to destroy PFAS. The UV/sulfite/iodide system creates a reductive environment through the generation of aqueous electrons, which can degrade PFAS. The extent of degradation and defluorination was explored for perfluorooctane sulfonic acid (PFOS), perfluorooctanoic acid (PFOA), 6:2 fluorotelomer sulfonic acid (6:2 FTS), and perfluorobutane sulfonic acid (PFBS). An initial UV/sulfite/iodide system achieved 100 % degradation and > 90 % defluorination for PFOS, PFOA, and 6:2 FTS, but was not capable of completely degrading PFBS. Transformation product elucidation experiments were performed for PFOS under different UV systems, and 6:2 FtSaB using the initial UV/sulfite/iodide system. Several transformation products were identified including -nF/+nH PFOS (n = 1-13), -F/+H shorter-chain PFSAs, 6:2 fluorotelomer sulfonamidoamine (6:2 FtSaAm), 6:2 fluorotelomer sulfonamide, and 6:2 fluorotelomer unsaturated sulfonamide. Novel identification of -F/+H perfluoropropane sulfonic acid (PFPS) and -F/+H perfluoroethane sulfonic acid (PFES) following degradation of PFOS confirms CC bond cleavage, and different isomers of -F/+H PFOS confirms the potential for CF bond cleavage to occur throughout the perfluoroalkyl chain. Additional optimization experiments were performed aiming to fully degrade PFBS. The optimal protocol found in this study involved an elevated initial sulfite concentration and adding additional sulfite at regular intervals during UV-activation, achieving >99.9 % destruction and complete quantitative defluorination of PFBS.
