Study of the Power Generation Performance of Impact Piezoelectric Energy Capture Devices

In order to solve the problem of conventional energy shortages, a non-resonant impact piezoelectric energy capture device using a (polyvinylidene fluoride) piezoelectric film at low frequency is proposed, and related theoretical analysis and experimental studies are conducted. The device has a simple internal structure, is green and easy to miniaturize, and is capable of harvesting energy at low frequencies to supply energy to micro and small electronic devices. First, to verify the feasibility of the device, the structure of the experimental device is modeled and dynamically analyzed. Then the modal, stress-strain, and output voltage of the piezoelectric film are simulated and analyzed using COMSOL Multiphysics simulation software. Finally, the experimental prototype is built according to the model, and the experimental platform is constructed to test the relevant performance. The experimental results show that the output power produced by the capturer varies within a certain range when the capturer is excited externally. With an external excitation force of 30 N, a piezoelectric film bending amplitude of 60°, and a piezoelectric film size of 45 × 80 mm, the resulting output power voltage is 21.69 V, the output current is 0.07 mA, and the output power is 1.5176 mW. This experiment verifies the feasibility of the energy capturer and provides a new idea for powering electronic components.