Related Experiment Video
Updated: May 8, 2026

Synthesis and Testing of Supported Pt-Cu Solid Solution Nanoparticle Catalysts for Propane Dehydrogenation
Published on: July 18, 2017
In situ and operando study of catalysts during high-temperature high-pressure catalysis in a fixed-bed plug flow
Yu Tang1, Luan Nguyen1, Yuting Li1
1Department of Chemical and Petroleum Engineering, University of Kansas, Kansas 66049, USA.
Abstract:
Numerous important catalytic reactions, such as Fischer-Tropsch synthesis (FTS), are performed under harsh conditions in terms of high temperature of a catalyst in a mixture of reactants at a high pressure. There has been a lack of an intrinsic correlation between a catalytic performance and its corresponding catalyst structure due to the unavailable information on the authentic structure of the catalyst during catalysis under a high-temperature high-pressure (HTHP) condition. Here, we report in situ/operando studies of Co catalysts during catalysis under HTHP conditions using x-ray absorption spectroscopy (XAS). A high-temperature high-pressure catalysis-XAS (HTHP Catalysis-XAS) system using a thin, small quartz or beryllium tube as the reactor was built for in situ/operando characterization of high-energy absorption edges of 4d transition metals or low-energy absorption edges of 3d/4d transition metals under high-temperature high-pressure conditions, respectively. This reactor can be used for HTHP catalysis performed at a temperature of up to 550 °C and a gas pressure of up to 60 bars for uncovering the chemical states and coordination environments of metal atoms of these catalysts during HTHP catalysis. The capability of collecting XAS data during HTHP catalysis was confirmed through tests at 400oC in the mixture of 20 bar mixture of reactants at beamline endstation. The operando studies of Ru catalyst particles under Fischer-Tropsch catalytic conditions with extended x-ray absorption fine structure spectroscopy revealed a restructuring of the Ru catalyst at 250 °C in the mixture of 6 bars CO and 12 bars H2 during FTS (30 ml/min), which was not observed at 300 °C in 1 bar H2 (20 ml/min). This observation suggests new chemistry for metal catalysts under HTHP condition inaccessible due to a lack of applicable characterizations. These tests confirmed the function of this HTHP Catalysis-XAS system for in situ/operando characterizations of catalysts during HTHP catalysis.
More Related Videos
11:38In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework
Published on: February 1, 2020
14:21Performing In Situ Closed-Cell Gas Reactions in the Transmission Electron Microscope
Published on: July 24, 2021
Related Concept Videos
Fast Reactions
Heterogeneous Catalysis