Related Experiment Video
Updated: Jul 27, 2025

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
New technology for preparing energetic materials by nanofiltration membrane (NF): rapid and efficient preparation of
Hai-Yang Zhu1,2, Ying-Hui Liu1,2, Hai-Yun Sun1,3
1School of Materials Science and Engineering, Beijing Institute of Technology Beijing 100081 P. R. China liyuchuan@bit.edu.cn pangsp@bit.edu.cn.
Abstract:
The development of environment-friendly and non-toxic green energetic materials and their safe, environmentally friendly, and economical production is very important to the national economy and national security. As an innovative, efficient, and environmentally friendly energetic material, the preferred preparation method of ammonium dinitramide (ADN) is the nitro-sulfur mixed acid method, which has the advantages of high yield, simple method, and easy access to raw materials. However, the large number of inorganic salt ions introduced by this method limits the large-scale production of ADN. Nanofiltration (NF) has been widely used in various industrial processes as a separation method with high separation efficiency and simple operation. In this study, NF was used for the desalination and purification of ADN synthesized by the mixed acid method. The effects of NF types, operation process (pressure, temperature, and feed solution concentration) on desalination efficiency, and membrane flux during purification were examined. The results showed that 600D NF could achieve the efficient desalination and purification of ADN. It was verified that the highest desalination and purification efficiency was achieved at 2 MPa pressure, 25 °C, and 1 time dilution of the feed solution, and the membrane flux of the desalination and purification process was stable. Under the optimized process conditions, the removal rate of inorganic salts and other impurities reached 99% (which can be recycled), the purity of ADN reached 99.8%, and the recovery rate reached 99%. This process has the potential for the large-scale production of ADN and provides a new process for the safe, efficient, and cheap preparation of energetic materials.
More Related Videos
12:05Preparation of Hydrophobic Metal-Organic Frameworks via Plasma Enhanced Chemical Vapor Deposition of Perfluoroalkanes for the Removal of Ammonia
Published on: October 10, 2013
08:05Measurement of the Potential Rates of Dissimilatory Nitrate Reduction to Ammonium Based on 14NH4+/15NH4+ Analyses via Sequential Conversion to N2O
Published on: October 7, 2020
Related Concept Videos
Preparation of Nitriles
Preparation of Amines: Alkylation of Ammonia and Amines
Each alkylation step makes the nitrogen center more nucleophilic, which triggers successive alkylations until a quaternary ammonium salt is formed. Considering...
Preparation of 1° Amines: Gabriel Synthesis
Strong bases like NaOH or KOH deprotonate the phthalimide to form the corresponding anion, which acts as a nucleophile. Further, the anion attacks an...
Preparation of Amines: Reduction of Amides and Nitriles
Amides can be reduced to primary, secondary, and tertiary amines using catalytic hydrogenation, active metals like Fe,...
Preparation of Amides
The DCC-promoted synthesis of amides begins with the protonation of DCC by carboxylic acid. The protonation makes it a better acceptor. Next, the addition of carboxylate to the protonated carbodiimide gives a reactive acylating agent.
Subsequently, the amine acts as a nucleophile that attacks the acylating agent to form a tetrahedral intermediate. In the...