Related Experiment Video
Updated: Jul 27, 2025

Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street
Published on: January 20, 2023
Effect of signal timing on vehicles' near misses at intersections
Zubayer Islam1, Mohamed Abdel-Aty2, Amrita Goswamy2
1Department of Civil, Environmental and Construction Engineering, University of Central Florida, Orlando, FL, 32816, USA. zubayer_islam@knights.ucf.edu.
Abstract:
Driving characteristics often vary between the different states of the signal. During red and yellow phase, drivers tend to speed up and reduce the following distance which in turn increases the possibility of rear end crashes. Intersection safety, therefore, relies on the correct modelling of signal phasing and timing parameters, and how drivers respond to its changes. This paper aims to identify the relationship between surrogate safety measures and signal phasing. Unmanned aerial vehicle (UAV) video data has been used to study a major intersection. Post encroachment time (PET) between vehicles was calculated from the video data as well as speed, heading and relevant signal timing parameters such as all red time, red clearance time, yellow time, etc. Random parameter ordered logit model was used to model the relationship between PET and signal timing parameters. Overall, the results showed that yellow time and red clearance time is positively related to PETs. The model was also able to identify certain signal phases that could be a potential safety hazard and would need to be retimed by considering the PETs. The odds ratios from the models also indicate that increasing the mean yellow and red clearance times by one second can improve the PET levels by 10% and 3%, respectively.
Related Concept Videos
Timing and Consequences on Behavior
Humans, however, can respond to delayed reinforcers. We often make decisions between immediate small rewards and delayed larger rewards. This ability to delay gratification is a significant...
Social Traps
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Transient and Steady-state Response
These test signals are integral in designing control systems to exhibit two key performance aspects: transient response and steady-state...
Classification of Signals
A continuous-time signal holds a value at every instant in time, representing information seamlessly. In contrast, a discrete-time signal holds values only at specific moments, often denoted as x(n), where...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...

