Stiffening Polymer Brush Membranes for Enhanced Organic Solvent Nanofiltration Selectivity

Membrane-based separations allow energy-efficient purification of organic solvents which are typically carried out by energy-intensive distillation. Polymer membranes are inexpensive and have obtained widespread industrial acceptance for water and biotech applications but not organic solvent nanofiltration due to relatively low selectivities. In this work, a new class of polymer brush membranes was prepared with high selectivities for methanol-toluene separation. Stiffening the brush structure by cross-linking with aromatic trimesic acid and aliphatic itaconic acid resulted in an increase in selectivity from 1.4 to 6.5-11.5. This was achieved by graft polymerization of a primary amine monomer (aminoethyl methacrylate) using single electron transfer-living radical polymerization (SET-LRP) followed by cross-linking. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and captive bubble contact angle measurements were used to characterize these membranes. The stiffness of the brush membranes was measured using a quartz crystal microbalance-dissipation (QCM-D) and correlated positively with selectivity for separating organic feed mixtures. This new class of membranes offers a tunable and scalable method for purification of organics.