Related Experiment Video
Updated: Jul 26, 2025

A Simple Method for Automated Solid Phase Extraction of Water Samples for Immunological Analysis of Small Pollutants
Published on: January 1, 2016
Development of an analytical method for the simultaneous determination of 50 semi-volatile organic contaminants in
Leire Mijangos1,2, Dennis Bilbao1,2, Naroa Lopez-Herguedas1,2
1Department of Analytical Chemistry, Faculty of Science and Technology, University of the Basque Country (UPV/EHU), Leioa, Basque Country, Spain.
Abstract:
This work describes the development of a robust analytical methodology for the simultaneous determination of 50 semi-volatile organic compounds (SVOCs) in wastewater effluent samples by solid-phase extraction (SPE) followed by gas chromatography coupled to mass spectrometry (GC-MS) analysis. In this work, we studied extensively whether the validated SPE method used for the analysis of polar compounds in wastewaters could be extended to the analysis of non-polar compounds in the same analytical run. To that aim, the effect of different organic solvents in the SPE process (i.e., sample conditioning prior to SPE, elution solvent and evaporation steps) was evaluated. In this sense, the addition of methanol to wastewater samples before the extraction, the use of hexane:toluene (4:1, v/v) mixture for the quantitative elution of target compounds, and the addition of isooctane during the evaporation were required to minimize analyte losses during SPE and enhance extraction yields. Overall, the developed methodology showed a good performance for the determination of 50 SVOCs, and was further applied to the analysis of real wastewater effluent samples.•A validated SPE method for polar compounds was extended to the analysis of non-polar compounds.•Elution with hex:tol (4:1, v/v) and the addition of isooctane during the evaporation yield good recoveries.•The developed methodology was suitable for the determination of 50 SVOCs in aqueous samples.
More Related Videos
Related Concept Videos
Volatilization
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...

