Enhancing shear strength and handleability of dewatered clay-rich coal tailings for dry-stacking

Mineral tailings dams pose high pollution risks to the environment and catastrophic failures. Dry stacking has been identified as a promising alternative to mitigate these risks and offers various benefits to the mining industry but lacks systematic research outcomes. To facilitate dry stacking, coal tailings slurries were dewatered using either filtration or centrifugation methods, resulting in a semi-solid form (cake) that can be safely disposed of. The handleability and disposability of these cakes are greatly influenced by the selection of chemical aids (such as polymer flocculants) and the mechanical dewatering technique employed. The effects of polyacrylamide (PAM) flocculants with a range of molecular weight, charge, and charge density are presented. Coal tailings samples with differences in clay mineralogy were dewatered using press filtration, solid bowl centrifugation, and natural air drying. Handleability and disposability of the tailings were assessed by their rheological properties, including yield stress, adhesive and cohesive stresses, and stickiness. Residue moisture, type of polymer flocculants, and clay mineralogy were found to be crucial factors affecting the handleability and disposability of the dewatered cakes. The tailing yield stress (shear strength) increased as the solid concentration increased. In the semi-solid regime (above 60 wt% solids), the tailings displayed stiff exponential growth. Similar trends were observed for stickiness and adhesive/cohesive energy of the tailings with a steel (truck) surface. Adding polymer flocculants increased the shear strength of the dewatered tailings by 10-15%, thus favouring disposability. However, the polymer selection for coal tailing handling and processing is a trade-off between its disposability and handleability, which requires a multi-criteria decision-making process. The current results also suggested that cationic PAM could be most suitable for dewatering by press filtration, while anionic PAM should be selected for dewatering by solid bowl centrifugation.