Numerical investigation on circular and elliptical bulge tests for inverse soft tissue characterization

The acquisition of insights concerning the mechanobiology of aneurysmatic aortic tissues is an important field of investigation. The complete characterization of aneurysm mechanical behaviour can be carried out by biaxial experimental tests on ex vivo specimens. In literature, several works proposed bulge inflation tests as a valid method to analyse aneurysmatic tissue. Bulge test data processing requires the adoption of digital image correlation and inverse analysis approaches to estimate strain and stress distributions, respectively. In this context, however, the accuracy of inverse analysis method has not been evaluated yet. This aspect appears particularly interesting given the anisotropic behaviour of the soft tissue and the possibility to adopt different die geometries. The goal of this study is to provide an accuracy characterization of the inverse analysis applied to the bulge test technique using a numerical approach. In particular, different cases of bulge inflation were simulated in a finite element environment as a reference. To investigate the effect of tissue anisotropic degree and bulge die geometries (circular and elliptical), different input parameters were considered to obtain multiple test cases. The specimen deformed shapes, resulting from the reference finite element simulations, were then analysed through an inverse analysis approach to produce an estimation of stress distributions. The estimated stresses were, at last, compared with the values from the reference finite element simulations. The results demonstrated that the circular die geometry produces a satisfactory estimation accuracy only under certain conditions of material quasi-isotropy. On the other hand, the choice of an elliptical bulge die was proven to be more suitable for the analysis of anisotropic tissues.