Related Experiment Video
Updated: Jul 24, 2025

Observation and Analysis of Blinking Surface-enhanced Raman Scattering
Published on: January 11, 2018
Joint Design of a Simultaneous Reflection and Transmission RIS in Mode-Switching Mode to Assist NOMA Systems
Xiaoping Zhou1, Hanqi Wang1, Jiajia Chen1
1The College of Information, Mechanical and Electrical Engineering, Shanghai Normal University, Shanghai 200234, China.
Abstract:
Simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) can reflect signals and transmissive signals simultaneously and can extend the coverage of signals. A conventional RIS mainly focuses on the case where the signal source and the target are on the same side. In this paper, a STAR-RIS-assisted non-orthogonal multiple access (NOMA) downlink communication system is considered to maximize the achievable rate for users by jointly optimizing the power-allocation coefficients, active beamforming, and STAR-RIS beamforming under the mode-switching (MS) protocol. The critical information of the channel is first extracted using the Uniform Manifold Approximation and Projection (UMAP) method. Based on the key extracted channel features, STAR-RIS elements and users are clustered individually using the fuzzy C-mean clustering (FCM) method. The alternating optimization method decomposes the original optimization problem into three sub-optimization problems. Finally, the sub-problems are converted to unconstrained optimization methods using penalty functions for the solution. Simulation results show that when the number of elements of RIS is 60, the achievable rate of the STAR-RIS-NOMA system is about 18% higher than that of the RIS-NOMA system.
Related Concept Videos
Transmission Line Design Considerations
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Maximum Power Transfer
By substituting the entire circuit with...
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...
Interference and Diffraction
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...

