Related Experiment Video
Updated: Jul 24, 2025

Investigating Motor Skill Learning Processes with a Robotic Manipulandum
Published on: February 12, 2017
Fixed-Time Recurrent NN Learning Control of Uncertain Robotic Manipulators with Time-Varying Constraints:
Qingxin Shi1, Changsheng Li1, Rui He1
1School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China.
Abstract:
This paper proposes a learning control framework for the robotic manipulator's dynamic tracking task demanding fixed-time convergence and constrained output. In contrast with model-dependent methods, the proposed solution deals with unknown manipulator dynamics and external disturbances by virtue of a recurrent neural network (RNN)-based online approximator. First, a time-varying tangent-type barrier Lyapunov function (BLF) is introduced to construct a fixed-time virtual controller. Then, the RNN approximator is embedded in the closed-loop system to compensate for the lumped unknown term in the feedforward loop. Finally, we devise a novel fixed-time, output-constrained neural learning controller by integrating the BLF and RNN approximator into the main framework of the dynamic surface control (DSC). The proposed scheme not only guarantees the tracking errors converge to the small neighborhoods about the origin in a fixed time, but also preserves the actual trajectories always within the prescribed ranges and thus improves the tracking accuracy. Experiment results illustrate the excellent tracking performance and verify the effectiveness of the online RNN estimate for unknown dynamics and external disturbances.
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Control Systems
At the heart...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Sequence Networks of Rotating Machines
Zero-sequence current induces a voltage drop across the generator's neutral impedance and other...

