Fe-N-Doped Conjugated Organic Polymer Efficiently Enhanced the Removal Rate of Cr(VI) from Water

A Fe-N conjugated organic polymer (SMP-Fr-Py) was prepared from ferrocene and pyrrole using a Scholl coupling reaction, which significantly improved the performance of Cr(VI) removal compared to the polymer (HCP-Fr-Py) prepared by adding the cross-linker formaldehyde dimethyl acetal (FDA). The results showed that at a pH of 2 and at 25 °C, the removal of Cr(VI) reached 90% for SMP-Fr-Py and only 58% for HCP-Fr-Py after 20 min of reaction. Subsequently, 99% and 78% were achieved after 120 min of reaction, respectively. The test results showed that the removal reaction followed a pseudo-second-order kinetic model. The removal efficiency decreased with increasing solution pH and initial Cr(VI) concentration, but increased with increasing SMP-Fr-Py dosage, reaching three cycles. The characterization of the reaction complexes and measurements of Cr species conversion revealed the near absence of Cr(VI) species in the solution. Approximately 38% of Cr(VI) was found to be adsorbed on the material surface, with another fraction present in solution (24%) and on the material surface (38%) in the form of Cr(III). The overall study showed that the direct connection of ferrocene and pyrrole in SMP-Fr-Py through C-C bonding increased the conjugated structure of the polymer backbone, which facilitated electron transfer and transport. Furthermore, the Fe-N elements worked synergistically with each other more easily, which improved the removal performance of Cr(VI) and provided a reference for the subsequent work.