A Methodology for In-Well Multiphase Flow Measurement with Strategically Positioned Local and/or Distributed Acoustic...

A new three-phase downhole flow measurement methodology is developed based on measurements of speed of sound at different locations along the well, where the pressure is greater than the bubble-point pressure at the first location and smaller at the second location. A bulk velocity measurement is also required at the second location. The fluid at the first location is a mixture of two phases, but becomes a mixture of three phases at the second location due to the liberation of gas from the oil phase. The flow equations are first solved for two-phase flow at the first location to obtain the first phase fraction, water-in-liquid ratio, and then this information is fed into the flow equations after adjustment to the local pressure and temperature conditions to solve for three-phase flow at the second location to obtain the second phase fraction, namely the liquid volume fraction. These two phase fractions along with the bulk velocity at the second location are sufficient to calculate the three-phase flow rates. The methodology is fully explained and the analytical solutions for three-phase flow measurement is explicitly provided in a step-by-step process. A Lego-like approach may be used with various sensor technologies to obtain the required measurements, although distributed acoustic sensing systems and optical flowmeters are ideal to easily and efficiently adopt the current methodology. This game-changing new methodology for measuring downhole three-phase flow can be implemented in existing wells with an optical infrastructure by adding a topside optoelectronics system.