A glimpse into the future: A suitable methodological approach for the detection and identification of...

In the frame of the circular economy, bioplastics are considered a good alternative to conventional plastic materials. Until recently, only a few studies have focused on the occurrence and impact of bio-microplastics (bio-MPs) in aquatic environments, and there is a lack of a methodological approach to measure their amount in marine compartments. This research aimed to identify and validate a method for bio-MPs extraction from biota. A chemical digestion protocol suitable for conventional MPs, using potassium hydroxide (KOH), was applied for the detection, in mussels, of MPs made with Mater-Bi (MBi) from socks used in mussel farming. This method was tested on virgin MBi (VMBi) and aged (AMBi) MPs, ranging from 200 to 1000 μm in presence and absence of mussel tissues. Samples were analysed in pre- and post-digestion steps to assess the recovery rate, potential visual and size changes and polymer alteration in different bio-MPs size ranges. Results showed that MBi seems to be affected by KOH under pre-production conditions (VMBi), whereas in the AMBi treatment, which represents the environmentally realistic condition, the presence of fouling due to deployment at sea preserves MBi from the action of the alkaline agent. This approach allowed the recovery of small MPs, generally difficult to extract from biota, in an optimal visual condition and without polymer alteration. Despite the fraction of organic material in the MBi, these results suggested the suitability of this method and provided the assessment of the KOH effects on MBi-MPs under different environmental conditions. Finally, validation tests proved that the KOH protocol represents a reliable approach for detecting bio-MPs in marine organisms. This study is an important starting point for assessing the impact of the bio-MPs on the marine environment and suggests future studies to improve these issues in order to fill the gaps in the field of bioplastics.