Related Experiment Video

Updated: Jul 21, 2025

Reservoir Condition Pore-scale Imaging of Multiple Fluid Phases Using X-ray Microtomography
08:02

Reservoir Condition Pore-scale Imaging of Multiple Fluid Phases Using X-ray Microtomography

Published on: February 25, 2015

12.6K

The capillary pressure vs. saturation curve for a fractured rock mass: fracture and matrix contributions

Alejandro Cardona1,2, Qi Liu3, J Carlos Santamarina2,4

  • 1Institute for Geophysics, Jackson School of Geosciences, The University of Texas at Austin, 10601 Exploration Way, Austin, TX, 78758, USA.

Scientific Reports
|July 25, 2023
PubMed

More Related Videos

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes07:06

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Published on: January 27, 2017

8.8K
Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs10:06

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

Published on: July 2, 2020

6.8K

Related Concept Videos

Capillary Exchange01:28

Capillary Exchange

The cardiovascular system's chief role is to disseminate gases, nutrients, waste, and other substances to the body's cells. Small molecules like gases, lipids, and lipid-soluble substances directly diffuse through capillary wall endothelial cell membranes. Glucose, amino acids, and ions, including sodium, potassium, calcium, and chloride, use transporters for facilitated diffusion via membrane-specific channels. Glucose, ions, and bigger molecules may also pass through intercellular...
4.9K
Pressure Variation in a Fluid at Rest01:11

Pressure Variation in a Fluid at Rest

In a fluid at rest, the pressure at any point beneath the fluid surface depends solely on the depth, not on the container's shape or size. This principle, known as hydrostatic pressure, arises because, in stationary fluids, there is no acceleration, meaning the forces within the fluid balance out. Only vertical forces, caused by the weight of the fluid above, contribute to pressure changes with depth.
When measuring pressure at two different levels within the fluid, the difference in...
298
Fluid Pressure01:14

Fluid Pressure

In mechanical engineering, fluid pressure plays a critical role in designing systems that utilize liquid flow, such as hydraulic systems, pumps, and valves. When designing these systems, engineers must ensure they can withstand the forces created by fluid pressure to avoid damage or failure.
According to Pascal's law, a fluid at rest will generate equal pressure in all directions. This pressure is measured as a force per unit area, and its magnitude depends on the fluid's specific...
640
Concept of Pressure at a Point01:15

Concept of Pressure at a Point

The concept of pressure at a point in a fluid establishes that pressure within a fluid is uniform in all directions at a specific location. This uniformity occurs because fluid molecules exert force evenly across any point due to their random motion and continuous collisions within the fluid. Pressure at a point is determined by the surrounding fluid molecules and is influenced by factors like depth and density, rather than by shape or orientation.
In a fluid at rest, pressure acts equally in...
295
Pore Size Distribution01:23

Pore Size Distribution

In concrete, the pore size distribution significantly influences the material's properties. Capillary pores, markedly larger than gel pores, form a vast network within partially hydrated cement paste, reducing the concrete's strength and increasing its permeability. This heightened permeability leads to a greater risk of damage from environmental factors like freeze-thaw cycles and chemical attacks, with the extent of vulnerability also being tied to the water-to-cement ratio.
Adequate...
165
Fluid Movement Between Compartments01:18

Fluid Movement Between Compartments

The force applied by fluids against a surface, known as hydrostatic pressure, initiates the transfer of fluid among different compartments. Within our blood vessels, the blood's hydrostatic pressure is a result of the heart's pumping action. At the arteriolar end of capillaries, hydrostatic pressure (capillary blood pressure) exceeds the opposing colloid osmotic pressure created primarily by plasma proteins like albumin. This discrepancy in pressure propels plasma and nutrients from the...
576