Peroxymonosulfate assisted mechanochemical remediation of high concentration DDTs contaminated soil

DDTs (DDT and its metabolites) contaminated sites urgently need to be treated efficiently and greenly. In this study, a horizontal planetary mechanochemical method with co-milling additives was developed aiming at efficiently degrading high-concentration DDTs in historical contaminated soil (∼7500 mg/kg). Peroxymonosulfate (PMS) was firstly used to the mechanochemical degradation of DDTs in historical contaminated soil, with a degradation efficiency of over 95% after 1 h of milling under the optimal milling conditions (C_R = 30:1, r = 500 rpm, R = 1:4). Mechanism study indicated that DDTs in soil were partially dechlorinated and mineralized. The main products formed might be chlorinated aliphatic hydrocarbons, which need further treatment by ball milling or other methods. Under the action of mechanical energy, PMS could oxidize DDTs in soil through non-radical way rather than common radical way. Then, a comprehensive assessment of this remediation method was conducted by analyzing the changes in soil properties and acute biotoxicity after ball milling. Although PMS had a great performance on the degradation of DDTs, especially p, p'-DDE, it would cause the acidification and salinization of soil. Therefore, further pH adjustment and desalination treatment were suggested to reduce the negative impacts. This work successfully presents a practical approach to mechanochemical remediation of DDTs contaminated sites.