Improved methylene blue adsorption from an aqueous medium by ozone-triethylenetetramine modification of sawdust-based...

In this study, sawdust biochar-O₃-TETA (SDBT), a novel biochar, was prepared via treatment with 80% sulfuric acid, followed by oxidation by ozone and subsequent treatment with boiling Triethylenetetramine (TETA). Characterization studies of the prepared SDBT adsorbent were performed with SEM-EDX, BET, XRD, BJH, FT-IR, DTA and TGA analyses. The adsorption efficiency of MB dye by SDBT biochar from water was investigated. Methylene Blue (MB) dye absorption was most effective when the solution pH was 12. The maximum removal % of MB dye was 99.75% using 20 mg/L as starting MB dye concentration and 2.0 g/L SDBT dose. The Q_m of the SDBT was 568.16 mg/g. Actual results were fitted to Temkin (TIM), Freundlich (FIM), and Langmuir (LIM) isotherm models. The experimental results for SDBT fitted well with all three models. Error function equations were used to test the results obtained from these isotherm models, which showed that the experimental results fit better with TIM and FIM. Kinetic data were investigated, and the pseudo-second-order (PSOM) had R² > 0.99 and was mainly responsible for guiding the absorption rate. The removal mechanism of the MB dye ions in a base medium (pH 12) may be achieved via physical interaction due to electrostatic interaction between the SDBT surface and the positive charge of the MB dye. The results show that SDBT effectively removes the MB dye from the aqueous environment and can be used continually without losing its absorption efficiency.