Urban Form Metrics for Promoting Walking: Street Layouts and Destinations

Mohammad Javad Koohsari1,2,3, Koichiro Oka4, Tomoki Nakaya5

  • 1School of Advanced Science and Technology, Japan Advanced Institute of Science and Technology, 1 Chome-1 Asahidai, Nomi, Ishikawa, 923-1211, Japan. koohsari@jaist.ac.jp.

Related Concept Videos

Design Example: Alignment of a Road Line Using GIS01:17

Design Example: Alignment of a Road Line Using GIS

The alignment of a road line using Geographic Information Systems (GIS) is a critical process in civil engineering, combining advanced technology with practical decision-making. This methodology begins with the collection of geospatial data, including information on land cover, geomorphology, drainage patterns, slope, and contour details. Such data is typically acquired through satellite imagery and GIS tools, offering a comprehensive understanding of the terrain.Once the data is gathered, it...
70
Design Example: Identifying the Locations of Monuments in the Field Using Global Positioning System Device01:30

Design Example: Identifying the Locations of Monuments in the Field Using Global Positioning System Device

Surveyors use Global Positioning System (GPS) technology to measure the precise location and elevation of points on Earth. In a recent survey, GPS receivers were used to determine the coordinates and elevations of two park monuments. The process involved careful mission planning, data collection, and correction to ensure accuracy. The survey began with mission planning to identify optimal satellite visibility and minimize Position Dilution of Precision (PDOP). A geodetic control point...
78
Design Example: Measuring Distance Between Two Points with Obstructions01:10

Design Example: Measuring Distance Between Two Points with Obstructions

When measuring distances in areas with physical obstructions, such as a lake in a field, surveyors must employ techniques to calculate accurate lengths without direct line measurements. One effective method is the offset technique, which allows for precise distance estimation over inaccessible stretches.In this scenario, a surveyor must measure a side of an area that crosses a lake. Since the measuring tape cannot span the lake, the surveyor begins by establishing a baseline that aligns with...
65
Selected Data About Geographic Locations01:25

Selected Data About Geographic Locations

Geographic Information Systems (GIS) rely on two core types of data: spatial data and attribute data.Spatial DataSpatial data defines the physical location of features within a coordinate system, typically expressed in terms of latitude and longitude. It provides precise positioning for elements like roads, rivers, or buildings.Attribute DataAttribute data complements spatial data by adding descriptive information about these features. For example, a road's spatial data includes its start and...
49
Masonry Paving01:21

Masonry Paving

The construction of masonry paving involves using materials such as bricks, stones, and concrete masonry units. These materials are chosen for their shape, color, strength, and resistance to abrasion and weathering. Masonry units can be installed dry on a thin layer of sand and a gravel base, or they can be embedded in mortar or asphalt on a concrete slab. For areas subjected to heavy vehicular loads, a rigid base layer of reinforced or unreinforced concrete is recommended. In contrast,...
272
Levels of Use of a GIS01:29

Levels of Use of a GIS

Geographic Information Systems (GIS) operate across three levels of application, each representing an increasing degree of complexity: data management, analysis, and prediction. These levels reflect the expanding functionality and versatility of GIS technology in handling spatial data for diverse purposes.Data ManagementAt its foundational level, GIS serves as a tool for data management, enabling the input, storage, retrieval, and organization of spatial data. This level is often employed in...
72