Mitigating AC and DC Interference in Multi-ToF-Camera Environments

Multi-camera interference (MCI) is an important challenge faced by continuous-wave time-of-flight (C-ToF) cameras. In the presence of other cameras, a C-ToF camera may receive light from other cameras' sources, resulting in potentially large depth errors. We propose stochastic exposure coding (SEC), a novel approach to mitigate MCI. In SEC, the camera integration time is divided into multiple time slots. Each camera is turned on during a slot with an optimal probability to avoid interference while maintaining high signal-to-noise ratio (SNR). The proposed approach has the following benefits. First, SEC can filter out both the AC and DC components of interfering signals effectively, which simultaneously achieves high SNR and mitigates depth errors. Second, time-slotting in SEC enables 3D imaging without saturation in the high photon flux regime. Third, the energy savings due to camera turning on during only a fraction of integration time can be utilized to amplify the source peak power, which increases the robustness of SEC to ambient light. Lastly, SEC can be implemented without modifying the C-ToF camera's coding functions, and thus, can be used with a wide range of cameras with minimal changes. We demonstrate the performance benefits of SEC with thorough theoretical analysis, simulations and real experiments, across a wide range of imaging scenarios.