End-Of-Use Fly Ash as an Effective Reinforcing Filler in Green Polymer Composites

The aim of this study is to use fly ash powder in an environmentally friendly matrix, in a novel way, addressing environmental and disposal problems. Fly ash/epoxy composites were prepared and studied varying the filler content. An investigation of structural and morphological characteristics was conducted using of X-ray diffraction patterns and scanning electron microscopy images, which revealed the successful fabrication of composites. Thermomechanical properties were studied via dynamic mechanical analysis and static mechanical tests. The composites exhibited an improved mechanical response. Broadband dielectric spectroscopy was used to investigate the dielectric response of the composite systems over the frequency range from 10^-1 to 10⁷ Hz and the temperature range from 30 to 160 °C. The analysis revealed the presence of three relaxation processes in the spectra of the tested systems. Interfacial polarization, the glass-to-rubber transition of the polymer matrix, and the rearrangement of polar side groups along the polymer chain are the processes that occur under a descending relaxation time. It was found that dielectric permittivity increases with filler content. Finally, the influence of filler content and the applied voltage under dc conditions was analyzed to determine the ability of the composites to store and retrieve electric energy. Fly ash improved the efficiency of the storing/retrieving energy of the composites.